Discussion:
RDi 9.1 issue on uploading sources with colorized comments
(too old to reply)
Fajardo, Eduardo
2014-08-27 01:47:38 UTC
Permalink
Hi,

I'm new to RDi and our company is moving forward to using RDi 9.1 with SVN as our SCM.

We are currently piloting RDi w/ SVN and I've learned that the Host Character preferences is a new thing for RDi 9.1. I set it up to replace the colorized comments hex attribute (column 6) to blanks when initially they appear as question marks (?) when viewed via LPEX editor. I was able to remove the question mark when viewing the remote source via LPEX. However, when I add the source to my iProject and open it, the "?" sign still appears.

Maybe some of you have encountered this bit before. Thanks.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Fajardo, Eduardo
2014-08-29 11:23:00 UTC
Permalink
RFE26471Display hex code characters that represent 5250 display attributes in LPEX (Windows 7)

This fix applies only when viewing iSeries sources via LPEX. However, when this source is uploaded to an iProject column6 changes to "?" and is also the same character that gets pushed back to iSeries when compiling that it gets annoying.

Using colors in a source may be dabatable but isn't there a way to replace the hex code attribute to blanks instead of "?"

Thanks.





-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Wednesday, August 27, 2014 9:48 AM
To: wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Subject: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

Hi,

I'm new to RDi and our company is moving forward to using RDi 9.1 with SVN as our SCM.

We are currently piloting RDi w/ SVN and I've learned that the Host Character preferences is a new thing for RDi 9.1. I set it up to replace the colorized comments hex attribute (column 6) to blanks when initially they appear as question marks (?) when viewed via LPEX editor. I was able to remove the question mark when viewing the remote source via LPEX. However, when I add the source to my iProject and open it, the "?" sign still appears.

Maybe some of you have encountered this bit before. Thanks.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Colson, Edmund B
2014-08-29 13:06:31 UTC
Permalink
I have the same problem and have just started deleting the "?" and other codes as well. It would be nice to have that taken care of when the RDi source is pushed back to the IBM i?.

While you're looking at that ( and maybe this should be another topic ), I work predominately with iProject Navigator because I can put all the objects I need to modify along with objects I need to create into a project and don't have to go back and forth looking for objects in the Remote System view. The problem I find is that the Source and Compile options are not in the menu options of that view, and I have to right-click on the object to push it back to the IBM i and to compile the source. It'd really be nice if the menu options could be put in the iProject Navigator view.



Regards,



Barry Colson | Sr. Programmer, Shared Services | Community Health Systems

4000 Meridian Blvd | Franklin, TN 37067 | Tel: 615.628.6719 | Fax: 615.465.3026 | http://www.chs.net



-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Friday, August 29, 2014 6:23 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments



RFE26471Display hex code characters that represent 5250 display attributes in LPEX (Windows 7)



This fix applies only when viewing iSeries sources via LPEX. However, when this source is uploaded to an iProject column6 changes to "?" and is also the same character that gets pushed back to iSeries when compiling that it gets annoying.



Using colors in a source may be dabatable but isn't there a way to replace the hex code attribute to blanks instead of "?"



Thanks.











-----Original Message-----

From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org]<mailto:[mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org]> On Behalf Of Fajardo, Eduardo

Sent: Wednesday, August 27, 2014 9:48 AM

To: wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>

Subject: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments



Hi,



I'm new to RDi and our company is moving forward to using RDi 9.1 with SVN as our SCM.



We are currently piloting RDi w/ SVN and I've learned that the Host Character preferences is a new thing for RDi 9.1. I set it up to replace the colorized comments hex attribute (column 6) to blanks when initially they appear as question marks (?) when viewed via LPEX editor. I was able to remove the question mark when viewing the remote source via LPEX. However, when I add the source to my iProject and open it, the "?" sign still appears.



Maybe some of you have encountered this bit before. Thanks.

"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.

--

This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org> To subscribe, unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/wdsci-l

or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>

Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.

"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.

--

This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org> To subscribe, unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/wdsci-l

or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>

Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.


--------------------------------------------------------------------------
Disclaimer: This electronic message may contain information that is Proprietary, Confidential, or legally privileged or protected. It is intended only for the use of the individual(s) and entity named in the message. If you are not an intended recipient of this message, please notify the sender immediately and delete the material from your computer. Do not deliver, distribute or copy this message and do not disclose its contents or take any action in reliance on the information it contains.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Fajardo, Eduardo
2014-08-29 14:41:40 UTC
Permalink
I do have the source and compile options available from the iProjects Navigator view. If you right click on the source you opened from the iProjects Navigator view, you should see the source and remote actions pop up menu. Remote actions is where you can see the compile option.


-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Colson, Edmund B
Sent: Friday, August 29, 2014 9:07 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

I have the same problem and have just started deleting the "?" and other codes as well. It would be nice to have that taken care of when the RDi source is pushed back to the IBM i?.

While you're looking at that ( and maybe this should be another topic ), I work predominately with iProject Navigator because I can put all the objects I need to modify along with objects I need to create into a project and don't have to go back and forth looking for objects in the Remote System view. The problem I find is that the Source and Compile options are not in the menu options of that view, and I have to right-click on the object to push it back to the IBM i and to compile the source. It'd really be nice if the menu options could be put in the iProject Navigator view.



Regards,



Barry Colson | Sr. Programmer, Shared Services | Community Health Systems

4000 Meridian Blvd | Franklin, TN 37067 | Tel: 615.628.6719 | Fax: 615.465.3026 | http://www.chs.net



-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Friday, August 29, 2014 6:23 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments



RFE26471Display hex code characters that represent 5250 display attributes in LPEX (Windows 7)



This fix applies only when viewing iSeries sources via LPEX. However, when this source is uploaded to an iProject column6 changes to "?" and is also the same character that gets pushed back to iSeries when compiling that it gets annoying.



Using colors in a source may be dabatable but isn't there a way to replace the hex code attribute to blanks instead of "?"



Thanks.











-----Original Message-----

From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org]<mailto:[mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org]> On Behalf Of Fajardo, Eduardo

Sent: Wednesday, August 27, 2014 9:48 AM

To: wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>

Subject: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments



Hi,



I'm new to RDi and our company is moving forward to using RDi 9.1 with SVN as our SCM.



We are currently piloting RDi w/ SVN and I've learned that the Host Character preferences is a new thing for RDi 9.1. I set it up to replace the colorized comments hex attribute (column 6) to blanks when initially they appear as question marks (?) when viewed via LPEX editor. I was able to remove the question mark when viewing the remote source via LPEX. However, when I add the source to my iProject and open it, the "?" sign still appears.



Maybe some of you have encountered this bit before. Thanks.

"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.

--

This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org> To subscribe, unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/wdsci-l

or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>

Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.

"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.

--

This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org> To subscribe, unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/wdsci-l

or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>

Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.


--------------------------------------------------------------------------
Disclaimer: This electronic message may contain information that is Proprietary, Confidential, or legally privileged or protected. It is intended only for the use of the individual(s) and entity named in the message. If you are not an intended recipient of this message, please notify the sender immediately and delete the material from your computer. Do not deliver, distribute or copy this message and do not disclose its contents or take any action in reliance on the information it contains.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Fajardo, Eduardo
2014-08-29 15:08:41 UTC
Permalink
I forgot to add, we're in the process of migrating to RDi / SVN so deleting each "?" will mean doing it thousands of times for all RPG/RPGLE sources. If RDi/LPEX can put in "?", maybe there's a way to customize it somewhere.




-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Colson, Edmund B
Sent: Friday, August 29, 2014 9:07 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

I have the same problem and have just started deleting the "?" and other codes as well. It would be nice to have that taken care of when the RDi source is pushed back to the IBM i?.

While you're looking at that ( and maybe this should be another topic ), I work predominately with iProject Navigator because I can put all the objects I need to modify along with objects I need to create into a project and don't have to go back and forth looking for objects in the Remote System view. The problem I find is that the Source and Compile options are not in the menu options of that view, and I have to right-click on the object to push it back to the IBM i and to compile the source. It'd really be nice if the menu options could be put in the iProject Navigator view.



Regards,



Barry Colson | Sr. Programmer, Shared Services | Community Health Systems

4000 Meridian Blvd | Franklin, TN 37067 | Tel: 615.628.6719 | Fax: 615.465.3026 | http://www.chs.net



-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Friday, August 29, 2014 6:23 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments



RFE26471Display hex code characters that represent 5250 display attributes in LPEX (Windows 7)



This fix applies only when viewing iSeries sources via LPEX. However, when this source is uploaded to an iProject column6 changes to "?" and is also the same character that gets pushed back to iSeries when compiling that it gets annoying.



Using colors in a source may be dabatable but isn't there a way to replace the hex code attribute to blanks instead of "?"



Thanks.











-----Original Message-----

From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org]<mailto:[mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org]> On Behalf Of Fajardo, Eduardo

Sent: Wednesday, August 27, 2014 9:48 AM

To: wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>

Subject: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments



Hi,



I'm new to RDi and our company is moving forward to using RDi 9.1 with SVN as our SCM.



We are currently piloting RDi w/ SVN and I've learned that the Host Character preferences is a new thing for RDi 9.1. I set it up to replace the colorized comments hex attribute (column 6) to blanks when initially they appear as question marks (?) when viewed via LPEX editor. I was able to remove the question mark when viewing the remote source via LPEX. However, when I add the source to my iProject and open it, the "?" sign still appears.



Maybe some of you have encountered this bit before. Thanks.

"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.

--

This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org> To subscribe, unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/wdsci-l

or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>

Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.

"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.

--

This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org> To subscribe, unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/wdsci-l

or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org<mailto:WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>

Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.


--------------------------------------------------------------------------
Disclaimer: This electronic message may contain information that is Proprietary, Confidential, or legally privileged or protected. It is intended only for the use of the individual(s) and entity named in the message. If you are not an intended recipient of this message, please notify the sender immediately and delete the material from your computer. Do not deliver, distribute or copy this message and do not disclose its contents or take any action in reliance on the information it contains.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Ken Killian
2014-08-29 14:49:03 UTC
Permalink
Create a simple an RPGLE to override the member with ExtFile to open the correct member. And then use %XLATE to convert invalid Hex Code to Blanks. At least that is what I did! <smile>

My Mickey-Mouse program to do this on the Power-System running IBM i. And I use the User-Action: "Remove Special Characters"...

CTL-OPT debug(*yes) dftactgrp(*no) Option(*Srcstmt:*Nodebugio);

DCL-F qrpglesrc disk(140) Usage(*Update) ExtFile(LF) ExtMbr(N) UsrOpn;

dcl-s LF Char(21);

DCL-C Hex x'000102030405060708090A0B0C0D0E0F+
101112131415161718191A1B1C1D1E1F+
202122232425262728292A2B2C2D2E2F+
303132333435363738393A3B3C3D3E3F';
DCL-C blk x'40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040';

// *ENTRY Interface for Main Procedure
DCL-PI *N;
l CHAR(10);
f CHAR(10);
n CHAR(10);
END-PI;

Iqrpglesrc ns
I 1 6 2Srcseq
I 7 12 0Srcdat
I 13 140 Srcdta

LF = %Trim(L) + '/' + %Trim(F);

open qrpglesrc;
read qrpglesrc;

dow not %eof;
SRCDTA = %XLATE(hex:blk:SRCDTA);
eXCEPT OUTPUT;
read qrpglesrc;
enddo;

close qrpglesrc;

*inlr = *on;
return;

OQRPGLESRC E OUTPUT
O SRCSEQ +0
O SRCDAT +0
O SRCDTA +0

Tried to keep it extremely short & simple to paste into Email message... <grin>

-Ken Killian-

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Friday, August 29, 2014 7:23 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

RFE26471Display hex code characters that represent 5250 display attributes in LPEX (Windows 7)

This fix applies only when viewing iSeries sources via LPEX. However, when this source is uploaded to an iProject column6 changes to "?" and is also the same character that gets pushed back to iSeries when compiling that it gets annoying.

Using colors in a source may be dabatable but isn't there a way to replace the hex code attribute to blanks instead of "?"

Thanks.





-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Wednesday, August 27, 2014 9:48 AM
To: wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Subject: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

Hi,

I'm new to RDi and our company is moving forward to using RDi 9.1 with SVN as our SCM.

We are currently piloting RDi w/ SVN and I've learned that the Host Character preferences is a new thing for RDi 9.1. I set it up to replace the colorized comments hex attribute (column 6) to blanks when initially they appear as question marks (?) when viewed via LPEX editor. I was able to remove the question mark when viewing the remote source via LPEX. However, when I add the source to my iProject and open it, the "?" sign still appears.

Maybe some of you have encountered this bit before. Thanks.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Fajardo, Eduardo
2014-08-29 15:32:45 UTC
Permalink
Thanks, Ken. I appreciate your help.

Someone from the team already created a utility to do just that as well as including the verification of the update. Apologies for the late notice but as I mentioned earlier, we're going to migrate all of our sources to RDi/SVN for the first time and it will entail running this utility hundreds of times with the number of releases/libraries that contain the offending comment lines. The in-house developed utility runs thru any or all source member/s in a specific library, btw.

However, I was hoping that there's an easier way that won't require running this kind of utility. I mean if there is a configuration file somewhere, much like the host character preferences for the LPEX display, that can be tweaked to serve this purpose and run seamlessly with the uploading of sources, that would be a lot easier for everyone. I'm pretty sure there are other installations that use colors in their codes and they'll encounter this as well.

I guess the option is not yet in RDi 9.1 so we will have to do tweak the sources in a semi-manual way. I hope IBM releases an update that caters to it though.

Thank you Ken and Edmund.

Cheers.



-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Ken Killian
Sent: Friday, August 29, 2014 10:49 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

Create a simple an RPGLE to override the member with ExtFile to open the correct member. And then use %XLATE to convert invalid Hex Code to Blanks. At least that is what I did! <smile>

My Mickey-Mouse program to do this on the Power-System running IBM i. And I use the User-Action: "Remove Special Characters"...

CTL-OPT debug(*yes) dftactgrp(*no) Option(*Srcstmt:*Nodebugio);

DCL-F qrpglesrc disk(140) Usage(*Update) ExtFile(LF) ExtMbr(N) UsrOpn;

dcl-s LF Char(21);

DCL-C Hex x'000102030405060708090A0B0C0D0E0F+
101112131415161718191A1B1C1D1E1F+
202122232425262728292A2B2C2D2E2F+
303132333435363738393A3B3C3D3E3F';
DCL-C blk x'40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040';

// *ENTRY Interface for Main Procedure
DCL-PI *N;
l CHAR(10);
f CHAR(10);
n CHAR(10);
END-PI;

Iqrpglesrc ns
I 1 6 2Srcseq
I 7 12 0Srcdat
I 13 140 Srcdta

LF = %Trim(L) + '/' + %Trim(F);

open qrpglesrc;
read qrpglesrc;

dow not %eof;
SRCDTA = %XLATE(hex:blk:SRCDTA);
eXCEPT OUTPUT;
read qrpglesrc;
enddo;

close qrpglesrc;

*inlr = *on;
return;

OQRPGLESRC E OUTPUT
O SRCSEQ +0
O SRCDAT +0
O SRCDTA +0

Tried to keep it extremely short & simple to paste into Email message... <grin>

-Ken Killian-

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Friday, August 29, 2014 7:23 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

RFE26471Display hex code characters that represent 5250 display attributes in LPEX (Windows 7)

This fix applies only when viewing iSeries sources via LPEX. However, when this source is uploaded to an iProject column6 changes to "?" and is also the same character that gets pushed back to iSeries when compiling that it gets annoying.

Using colors in a source may be dabatable but isn't there a way to replace the hex code attribute to blanks instead of "?"

Thanks.





-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Wednesday, August 27, 2014 9:48 AM
To: wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Subject: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

Hi,

I'm new to RDi and our company is moving forward to using RDi 9.1 with SVN as our SCM.

We are currently piloting RDi w/ SVN and I've learned that the Host Character preferences is a new thing for RDi 9.1. I set it up to replace the colorized comments hex attribute (column 6) to blanks when initially they appear as question marks (?) when viewed via LPEX editor. I was able to remove the question mark when viewing the remote source via LPEX. However, when I add the source to my iProject and open it, the "?" sign still appears.

Maybe some of you have encountered this bit before. Thanks.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Edmund Reinhardt
2014-08-29 20:11:26 UTC
Permalink
Eduardo,
RDi does not have any other tooling. I think the semi manual conversion is
the best option so far.
I was wondering if you set the Preferences->General->Workspace Text file
encoding to UTF-8, would it handle the hex characters any better.



Regards,

Edmund (E.H.) Reinhardt
Technical Architect for Rational Developer for i



Phone: 1-905-413-3125 | Home: 1-905-854-6195 IBM
E-mail: edmund.reinhardt-G1DYhSM1WHTQT0dZR+***@public.gmane.org
RDi YouTube: 8200 Warden Ave
www.youtube.com/user/IBMRational#g/c/62DF24D5BCD43501 Markham, ON L6G 1C7
Find me on: LinkedIn: Canada
http://ca.linkedin.com/in/edmundreinhardt/






From: "Fajardo, Eduardo" <eduardo.fajardo-***@public.gmane.org>
To: "Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries" <wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>
Date: 29/08/2014 11:35 AM
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with
colorized comments
Sent by: "WDSCI-L" <wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>



Thanks, Ken. I appreciate your help.

Someone from the team already created a utility to do just that as well as
including the verification of the update. Apologies for the late notice but
as I mentioned earlier, we're going to migrate all of our sources to
RDi/SVN for the first time and it will entail running this utility hundreds
of times with the number of releases/libraries that contain the offending
comment lines. The in-house developed utility runs thru any or all source
member/s in a specific library, btw.

However, I was hoping that there's an easier way that won't require running
this kind of utility. I mean if there is a configuration file somewhere,
much like the host character preferences for the LPEX display, that can be
tweaked to serve this purpose and run seamlessly with the uploading of
sources, that would be a lot easier for everyone. I'm pretty sure there are
other installations that use colors in their codes and they'll encounter
this as well.

I guess the option is not yet in RDi 9.1 so we will have to do tweak the
sources in a semi-manual way. I hope IBM releases an update that caters to
it though.

Thank you Ken and Edmund.

Cheers.



-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Ken
Killian
Sent: Friday, August 29, 2014 10:49 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized
comments

Create a simple an RPGLE to override the member with ExtFile to open the
correct member. And then use %XLATE to convert invalid Hex Code to Blanks.
At least that is what I did! <smile>

My Mickey-Mouse program to do this on the Power-System running IBM i. And I
use the User-Action: "Remove Special Characters"...

CTL-OPT debug(*yes) dftactgrp(*no) Option(*Srcstmt:*Nodebugio);

DCL-F qrpglesrc disk(140) Usage(*Update) ExtFile(LF) ExtMbr(N)
UsrOpn;

dcl-s LF Char(21);

DCL-C Hex x'000102030405060708090A0B0C0D0E0F+
101112131415161718191A1B1C1D1E1F+
202122232425262728292A2B2C2D2E2F+
303132333435363738393A3B3C3D3E3F';
DCL-C blk x'40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040';

// *ENTRY Interface for Main Procedure
DCL-PI *N;
l CHAR(10);
f CHAR(10);
n CHAR(10);
END-PI;

Iqrpglesrc ns
I 1 6 2Srcseq
I 7 12 0Srcdat
I 13 140 Srcdta

LF = %Trim(L) + '/' + %Trim(F);

open qrpglesrc;
read qrpglesrc;

dow not %eof;
SRCDTA = %XLATE(hex:blk:SRCDTA);
eXCEPT OUTPUT;
read qrpglesrc;
enddo;

close qrpglesrc;

*inlr = *on;
return;

OQRPGLESRC E OUTPUT
O SRCSEQ +0
O SRCDAT +0
O SRCDTA +0

Tried to keep it extremely short & simple to paste into Email message...
<grin>

-Ken Killian-

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo,
Eduardo
Sent: Friday, August 29, 2014 7:23 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized
comments

RFE26471Display hex code characters that represent 5250 display attributes
in LPEX (Windows 7)

This fix applies only when viewing iSeries sources via LPEX. However, when
this source is uploaded to an iProject column6 changes to "?" and is also
the same character that gets pushed back to iSeries when compiling that it
gets annoying.

Using colors in a source may be dabatable but isn't there a way to replace
the hex code attribute to blanks instead of "?"

Thanks.





-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo,
Eduardo
Sent: Wednesday, August 27, 2014 9:48 AM
To: wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Subject: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized
comments

Hi,

I'm new to RDi and our company is moving forward to using RDi 9.1 with SVN
as our SCM.

We are currently piloting RDi w/ SVN and I've learned that the Host
Character preferences is a new thing for RDi 9.1. I set it up to replace
the colorized comments hex attribute (column 6) to blanks when initially
they appear as question marks (?) when viewed via LPEX editor. I was able
to remove the question mark when viewing the remote source via LPEX.
However, when I add the source to my iProject and open it, the "?" sign
still appears.

Maybe some of you have encountered this bit before. Thanks.
"Misys" is the trade name of the Misys group of companies. This email and
any attachments have been scanned for known viruses using multiple
scanners. This email message is intended for the named recipient only. It
may be privileged and/or confidential. If you are not the named recipient
of this email please notify us immediately and do not copy it or use it for
any purpose, nor disclose its contents to any other person. This email does
not constitute the commencement of legal relations between you and Misys.
Please refer to the executed contract between you and the relevant member
of the Misys group for the identity of the contracting party with which you
are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list
options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at
http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and
any attachments have been scanned for known viruses using multiple
scanners. This email message is intended for the named recipient only. It
may be privileged and/or confidential. If you are not the named recipient
of this email please notify us immediately and do not copy it or use it for
any purpose, nor disclose its contents to any other person. This email does
not constitute the commencement of legal relations between you and Misys.
Please refer to the executed contract between you and the relevant member
of the Misys group for the identity of the contracting party with which you
are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list
options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at
http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list
options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at
http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and
any attachments have been scanned for known viruses using multiple
scanners. This email message is intended for the named recipient only. It
may be privileged and/or confidential. If you are not the named recipient
of this email please notify us immediately and do not copy it or use it for
any purpose, nor disclose its contents to any other person. This email does
not constitute the commencement of legal relations between you and Misys.
Please refer to the executed contract between you and the relevant member
of the Misys group for the identity of the contracting party with which you
are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Fajardo, Eduardo
2014-09-01 13:01:11 UTC
Permalink
Hi Edmund,

Changing the text file encoding to UTF-8 fixed the issue.

The source added to the iProject didn't contain the "?" character anymore. What's even better is that when this same source is pushed back into the iProject associated library in the iSeries the comment line remained highlighted. Doing a source compare confirmed that there wasn't any change made by the upload/download process into the source.

I'll still be doing more testing with a few more sources but I think this issue can be considered as closed, barring any issues/errors that I didn't notice.

Thank you very much!


-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Edmund Reinhardt
Sent: Saturday, August 30, 2014 4:11 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments


Eduardo,
RDi does not have any other tooling. I think the semi manual conversion is the best option so far.
I was wondering if you set the Preferences->General->Workspace Text file encoding to UTF-8, would it handle the hex characters any better.



Regards,

Edmund (E.H.) Reinhardt
Technical Architect for Rational Developer for i



Phone: 1-905-413-3125 | Home: 1-905-854-6195 IBM
E-mail: edmund.reinhardt-G1DYhSM1WHTQT0dZR+***@public.gmane.org
RDi YouTube: 8200 Warden Ave
www.youtube.com/user/IBMRational#g/c/62DF24D5BCD43501 Markham, ON L6G 1C7
Find me on: LinkedIn: Canada
http://ca.linkedin.com/in/edmundreinhardt/






From:"Fajardo, Eduardo" <eduardo.fajardo-***@public.gmane.org>
To:"Rational Developer for IBM i / Websphere Development Studio
Client forSystem i & iSeries" <wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>
Date:29/08/2014 11:35 AM
Subject:Re: [WDSCI-L] RDi 9.1 issue on uploading sourceswith
colorizedcomments
Sent by:"WDSCI-L" <wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>



Thanks, Ken. I appreciate your help.

Someone from the team already created a utility to do just that as well as including the verification of the update. Apologies for the late notice but as I mentioned earlier, we're going to migrate all of our sources to RDi/SVN for the first time and it will entail running this utility hundreds of times with the number of releases/libraries that contain the offending comment lines. The in-house developed utility runs thru any or all source member/s in a specific library, btw.

However, I was hoping that there's an easier way that won't require running this kind of utility. I mean if there is a configuration file somewhere, much like the host character preferences for the LPEX display, that can be tweaked to serve this purpose and run seamlessly with the uploading of sources, that would be a lot easier for everyone. I'm pretty sure there are other installations that use colors in their codes and they'll encounter this as well.

I guess the option is not yet in RDi 9.1 so we will have to do tweak the sources in a semi-manual way. I hope IBM releases an update that caters to it though.

Thank you Ken and Edmund.

Cheers.



-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Ken Killian
Sent: Friday, August 29, 2014 10:49 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

Create a simple an RPGLE to override the member with ExtFile to open the correct member. And then use %XLATE to convert invalid Hex Code to Blanks.
At least that is what I did! <smile>

My Mickey-Mouse program to do this on the Power-System running IBM i. And I use the User-Action: "Remove Special Characters"...

CTL-OPT debug(*yes) dftactgrp(*no) Option(*Srcstmt:*Nodebugio);

DCL-F qrpglesrc disk(140) Usage(*Update) ExtFile(LF) ExtMbr(N) UsrOpn;

dcl-s LF Char(21);

DCL-C Hex x'000102030405060708090A0B0C0D0E0F+
101112131415161718191A1B1C1D1E1F+
202122232425262728292A2B2C2D2E2F+
303132333435363738393A3B3C3D3E3F';
DCL-C blk x'40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040';

// *ENTRY Interface for Main Procedure
DCL-PI *N;
l CHAR(10);
f CHAR(10);
n CHAR(10);
END-PI;

Iqrpglesrc ns
I 1 6 2Srcseq
I 7 12 0Srcdat
I 13 140 Srcdta

LF = %Trim(L) + '/' + %Trim(F);

open qrpglesrc;
read qrpglesrc;

dow not %eof;
SRCDTA = %XLATE(hex:blk:SRCDTA);
eXCEPT OUTPUT;
read qrpglesrc;
enddo;

close qrpglesrc;

*inlr = *on;
return;

OQRPGLESRC E OUTPUT
O SRCSEQ +0
O SRCDAT +0
O SRCDTA +0

Tried to keep it extremely short & simple to paste into Email message...
<grin>

-Ken Killian-

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Friday, August 29, 2014 7:23 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

RFE26471Display hex code characters that represent 5250 display attributes in LPEX (Windows 7)

This fix applies only when viewing iSeries sources via LPEX. However, when this source is uploaded to an iProject column6 changes to "?" and is also the same character that gets pushed back to iSeries when compiling that it gets annoying.

Using colors in a source may be dabatable but isn't there a way to replace the hex code attribute to blanks instead of "?"

Thanks.





-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Fajardo, Eduardo
Sent: Wednesday, August 27, 2014 9:48 AM
To: wdsci-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Subject: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

Hi,

I'm new to RDi and our company is moving forward to using RDi 9.1 with SVN as our SCM.

We are currently piloting RDi w/ SVN and I've learned that the Host Character preferences is a new thing for RDi 9.1. I set it up to replace the colorized comments hex attribute (column 6) to blanks when initially they appear as question marks (?) when viewed via LPEX editor. I was able to remove the question mark when viewing the remote source via LPEX.
However, when I add the source to my iProject and open it, the "?" sign still appears.

Maybe some of you have encountered this bit before. Thanks.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys.
Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys.
Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys.
Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.

--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
"Misys" is the trade name of the Misys group of companies. This email and any attachments have been scanned for known viruses using multiple scanners. This email message is intended for the named recipient only. It may be privileged and/or confidential. If you are not the named recipient of this email please notify us immediately and do not copy it or use it for any purpose, nor disclose its contents to any other person. This email does not constitute the commencement of legal relations between you and Misys. Please refer to the executed contract between you and the relevant member of the Misys group for the identity of the contracting party with which you are dealing.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Barbara Morris
2014-08-30 00:11:20 UTC
Permalink
Post by Ken Killian
Iqrpglesrc ns
I 1 6 2Srcseq
I 7 12 0Srcdat
I 13 140 Srcdta
OQRPGLESRC E OUTPUT
O SRCSEQ +0
O SRCDAT +0
O SRCDTA +0
Pretty much off the main topic but I can't help it ...

For a program-described file, you can use a data structure instead of
defining I and O specs. It's nicer when the rest of the program is
free-form, and I think it's easier and less error-prone than I and O specs.

dcl-ds srcline;
srcseq zoned(6 : 2);
srcdat zoned(6);
srcdta char(128);
end-ds;
...
open qrpglesrc;
read qrpglesrc srcline;

dow not %eof;
SRCDTA = %XLATE(hex:blk:SRCDTA);
update qrpglesrc srcline;
read qrpglesrc srcline;
enddo;
--
Barbara
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Ken Killian
2014-08-30 15:44:40 UTC
Permalink
Barbara,

Good point! I actually wrote this utility about 8-years ago, when I first started using WDSC.

When I use file inside in sub-procedure, I have to use a Data-Structure on the Read/Update.

I forgot about that! I *ALWAYS* appreciate tips!!! So much easier to READ the code too!

Thanks!

PS. I had to run some utility reports for my boss to manually write "CSV" files to import into XLS. So, I fell back to what I knew/remembered. And I use the Old-fashion "I" & "O" specs! I like your solution SO MUCH BETTER! Thanks AGAIN! :)


-Ken Killian-

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Barbara Morris
Sent: Friday, August 29, 2014 8:11 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments
Post by Ken Killian
Iqrpglesrc ns
I 1 6 2Srcseq
I 7 12 0Srcdat
I 13 140 Srcdta
OQRPGLESRC E OUTPUT
O SRCSEQ +0
O SRCDAT +0
O SRCDTA +0
Pretty much off the main topic but I can't help it ...

For a program-described file, you can use a data structure instead of defining I and O specs. It's nicer when the rest of the program is free-form, and I think it's easier and less error-prone than I and O specs.

dcl-ds srcline;
srcseq zoned(6 : 2);
srcdat zoned(6);
srcdta char(128);
end-ds;
...
open qrpglesrc;
read qrpglesrc srcline;

dow not %eof;
SRCDTA = %XLATE(hex:blk:SRCDTA);
update qrpglesrc srcline;
read qrpglesrc srcline;
enddo;
--
Barbara

--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Gary Thompson
2014-09-02 12:51:14 UTC
Permalink
Barbara,
I'm missing something: In your example [SRCDTA = %XLATE(hex:blk:SRCDTA);], what are 'hex' and 'blk' ?

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Barbara Morris
Sent: Friday, August 29, 2014 6:11 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments
Post by Ken Killian
Iqrpglesrc ns
I 1 6 2Srcseq
I 7 12 0Srcdat
I 13 140 Srcdta
OQRPGLESRC E OUTPUT
O SRCSEQ +0
O SRCDAT +0
O SRCDTA +0
Pretty much off the main topic but I can't help it ...

For a program-described file, you can use a data structure instead of defining I and O specs. It's nicer when the rest of the program is free-form, and I think it's easier and less error-prone than I and O specs.

dcl-ds srcline;
srcseq zoned(6 : 2);
srcdat zoned(6);
srcdta char(128);
end-ds;
...
open qrpglesrc;
read qrpglesrc srcline;

dow not %eof;
SRCDTA = %XLATE(hex:blk:SRCDTA);
update qrpglesrc srcline;
read qrpglesrc srcline;
enddo;
--
Barbara

--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Ken Killian
2014-09-02 13:24:39 UTC
Permalink
DCL-C Hex x'000102030405060708090A0B0C0D0E0F+
101112131415161718191A1B1C1D1E1F+
202122232425262728292A2B2C2D2E2F+
303132333435363738393A3B3C3D3E3F';
DCL-C blk x'40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040';
From my Sit & Spin program to remove special Hexadecimal values that SEU-Pukes put into their code to add color. Which RDi 9.1 ALREADY HAS!!!
<LOL>

PS. Thanks again Barbara for your Tip! I love it! :)

-Ken Killian-

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Gary Thompson
Sent: Tuesday, September 02, 2014 8:51 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

Barbara,
I'm missing something: In your example [SRCDTA = %XLATE(hex:blk:SRCDTA);], what are 'hex' and 'blk' ?

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Barbara Morris
Sent: Friday, August 29, 2014 6:11 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments
Iqrpglesrc ns
I 1 6 2Srcseq
I 7 12 0Srcdat
I 13 140 Srcdta
OQRPGLESRC E OUTPUT
O SRCSEQ +0
O SRCDAT +0
O SRCDTA +0
Pretty much off the main topic but I can't help it ...

For a program-described file, you can use a data structure instead of defining I and O specs. It's nicer when the rest of the program is free-form, and I think it's easier and less error-prone than I and O specs.

dcl-ds srcline;
srcseq zoned(6 : 2);
srcdat zoned(6);
srcdta char(128);
end-ds;
...
open qrpglesrc;
read qrpglesrc srcline;

dow not %eof;
SRCDTA = %XLATE(hex:blk:SRCDTA);
update qrpglesrc srcline;
read qrpglesrc srcline;
enddo;
--
Barbara

--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Gary Thompson
2014-09-02 14:13:55 UTC
Permalink
Oh, of course - thanks for the update.
Have same issue here: so far I'm the one RDi convert.
I use a local command I call from PDM, but your fix apparently skips that detour: nice


-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Ken Killian
Sent: Tuesday, September 02, 2014 7:25 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

DCL-C Hex x'000102030405060708090A0B0C0D0E0F+
101112131415161718191A1B1C1D1E1F+
202122232425262728292A2B2C2D2E2F+
303132333435363738393A3B3C3D3E3F';
DCL-C blk x'40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040+
40404040404040404040404040404040';
From my Sit & Spin program to remove special Hexadecimal values that SEU-Pukes put into their code to add color. Which RDi 9.1 ALREADY HAS!!!
<LOL>

PS. Thanks again Barbara for your Tip! I love it! :)

-Ken Killian-

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Gary Thompson
Sent: Tuesday, September 02, 2014 8:51 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments

Barbara,
I'm missing something: In your example [SRCDTA = %XLATE(hex:blk:SRCDTA);], what are 'hex' and 'blk' ?

-----Original Message-----
From: WDSCI-L [mailto:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org] On Behalf Of Barbara Morris
Sent: Friday, August 29, 2014 6:11 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Subject: Re: [WDSCI-L] RDi 9.1 issue on uploading sources with colorized comments
Iqrpglesrc ns
I 1 6 2Srcseq
I 7 12 0Srcdat
I 13 140 Srcdta
OQRPGLESRC E OUTPUT
O SRCSEQ +0
O SRCDAT +0
O SRCDTA +0
Pretty much off the main topic but I can't help it ...

For a program-described file, you can use a data structure instead of defining I and O specs. It's nicer when the rest of the program is free-form, and I think it's easier and less error-prone than I and O specs.

dcl-ds srcline;
srcseq zoned(6 : 2);
srcdat zoned(6);
srcdta char(128);
end-ds;
...
open qrpglesrc;
read qrpglesrc srcline;

dow not %eof;
SRCDTA = %XLATE(hex:blk:SRCDTA);
update qrpglesrc srcline;
read qrpglesrc srcline;
enddo;
--
Barbara

--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
John Yeung
2014-09-02 16:58:41 UTC
Permalink
Post by Gary Thompson
Have same issue here: so far I'm the one RDi convert.
Interesting. So did your company pay for your RDi seat, or did you
pay out of your own pocket? Is the plan to see if you can demonstrate
productivity gains, and if so, then more folks convert?

John Y.
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.
Loading...